aluminum cassette-panels of alloy with high density
lifting sliding sturdy aluminum door structure profile
After-sales Service Provided:
Engineers available to service machinery overseas
30 Unit/Units per Year
Packaging & Delivery
within 3-4 months after receipt of downpayments
timber drying kiln
1.1Kiln dimensions & capacity:
Kiln external dimensions : Width 7000 mm
: Depth 6600 mm
: Height 5900 mm
Kiln internal dimensions : Width 6600 mm
: Depth 6400 mm
: Height 4500 mm( up to false ceiling)
Door opening : Width 6600 mm
: Height 4500 mm
Kiln capacity: Approx. net60m3, 30mm of thickness@20mm stickers
Stacks dimension : Width 1 x 6000 mm
: Depth 4 x 1000 mm
: Height 3 x 1400 mm
Type of door: Lift-sliding door
Way of loading: Frontal, forklift
1.2 PERFORMANCE DATA:
Bearing structure Aluminum alloy
Heating medium Steam
Humidification medium Steam
Type of automatic control system HOLZMEISTER M800B (DELHPI)
Number of fans 3units
Volume of circulating air 27,000 m3 /h
Motor 3kw, class IP55,ambient temperature + 85 °C
Electricity demand 9kw
Voltage & Frequency 380v, 50Hz
Inspection doorsBack walls
Snow Loading 150 Kg/m2
Wind loading 120 km/h
2. PARLICULAR DETAILS
2.1. BEARING STRUCTURE
The structure of the kiln is made completely of special aluminum alloy AW6063. All the beams, profiles, and roof holding structure as well as wind-bracing have high resistance to corrosion, which are of I, U, L & C.
The complete structure is self-supporting and is mounted on to a base concrete foundation using stainless- steel heavy-duty dowels.
The connecting materials, bolts, nuts &washer are made of stainless steel. The offered bearing structure can bear stress of 150kg/m2 of snow load and wind load of 120km/h.
2.2. KILN CASSETES SHEETING AND INSULATION SYSTEM
The heat insulation system is made of aluminum cassette-panels of alloy with high density non-flammable rock wool thermal insulation of 85mm thickness, the density of rock wool is 55kg/m3, which is higher than that of fiberglass. There is a slope on the roof, avoiding accumulation of rain or snow on the roof. The kiln wall is externally and internally faced with corrugate embossed aluminum sheets with a granulated finish of 1.1 mm. The Cassettes themselves are specially mounted with the supported of aluminum plate between columns of bearing structure. High-temperature caulking between cassettes protects the walls from heat transfer. The caulking is applied at any cassettes joints.
The thermal constant of the jacket penetrability is k=0.45w/m-2.k-1. This is due to the particular construction characteristics of the walls. They are completely fire resistant; they do not absorb moisture, guaranteeing constant operation.
2.3. KILN DOOR
The lifting –sliding sturdy aluminum door structure profile. The special groove where the strong rubber seal is installed provides optimum tightening alongside the doorframe. The kiln door wall is of the same construction as the kiln and roof walls using rock wool insulation of 85mm.The closing system is equipped with adjustable counterparts which enable the precise adhesion of the door to the kiln structure. The bottom mullions feature nylon rollers on heavy duty stainless pins
2.4. KILN DOOR CARRIER AND LIFTING DEVICE
The TECH I’ beams monorail carriage design realizes unrestricted movement of the door which hangs vertically in its raised position. Carriage wheels are sealed ball bearing to in any weather conditions.
2.5. INSPECTION DOOR
The inspection door is included and is of opening 1500×600 mm
with rock wool insulation of 85mm.
It is equipped with a safety handle, easy to open and close.
The inspection door will be placed in rear wall.
2.6. FALSE CEILING
The chamber is divided by aluminum intermediate ceiling into a technology section where all the technical elements are located and a drying section where the timber to be dried is placed. The intermediate ceiling is mounted on the lower part of the chamber beams and is made of corrugated profile sheets of thickness1.1 mm ensuring the smooth air flow.
2.7 FANS & MOTORS
The air ventilation is provided by reversible medium pressure fans with high performance level installed in each chamber above false ceiling of the chamber. The fans can perform with the same efficiency and capacity in both direction and at any revolution rate. Each fan has 6 aluminum swinging blades with perfectly symmetrical shape. The aluminum fan φ800 mm impellers are fixed directly on to the shaft of the specially designed motors. The motors are tropically insulated to resist high temperature (IP55) and to work without any problems in environments reaching 100% of moisture content.
2.8 HEATING ELEMENTS
The heating elements use aluminum fin built on stainless steel pipe. Heat exchanger coils are located vertically overhead. All the piping from collectors for the heat exchanger coils up to flanges out of kilns are made in stainless steel. The heat output is designed for the highest demand.
2.9. THE AIR EXCHANG SYSTEM
The ventilation and suction system of vents are made of aluminum material. Vents make use of pressure and vacuum zones generated inside the chamber which avoids the use of additional fans. The whole system of vents works simultaneously. In this offer the chimney are provided in the chamber ceiling. The vents are positive opening and closing.
2.10. ELECTRIC BOARD
The board is the modular panel meeting the international standards relevant to protection class IP55. The operating drying components are placed in the electric board. (Switches, relays, fusing etc.)
2.11. AUTOMATIC CONTROL OF THE DRYING PROCESS HOLZMEISTER M800B (DELPHI)
Every unit is equipped with:
6 pcs of probes to detect the wood moisture
2 pcs of EMC stations/ front and back / For climate controlling
It is a LCD based automatic kiln controller. The kiln dryer controller DELPHI is based on the most advanced electronic technology today available and includes all the best solutions that LOGICA H&S has developed in over ten years of experience in timber drying control systems.
The new user interface, based on a LCD graphic display having a very good readability, allows an easy set-up also to not skilled users, because all setting are made through self-explaining menu and the access to most advanced menus, divided from the ones most commonly used.
To further improve the friendly interface of DELPHI, also for this model it has been adopted the iButton system , an useful method, based on “intelligent buttons” that can be used to save and recall drying(in addition to internal memory), to protect the controller set-up against not authorized people and upgrade the controller software. Having a drying program saved into an iButton, everybody can start a drying cycle, simply by laying the button on the addicted reader. The same solution can also be used to order to your assistance centre a drying program ready to use, without need to inputting it manually into the controller, or to transfer a program from a controller to another one. Obviously there are also many standard programs (over 80) ready to use for a lot of wood essences, recallable from an addicted menu, useful for users without particular needs or for beginners.
DELPHI is supplied with LG25, the new probe amplifier of Logica H&S. Thanks to a number of new
solutions (among them measures with alternate voltage variable(VAV) with timber moistures, digital filter for mains supply noise rejection (MNR), this device assures the maximum reliability together with the better external noise rejection. The amplifier comes in a sealed (IP65) aluminum case, and complete with wirings for the probes boxes inside the kiln made with shielded and Teflon insulated cables. The probes boxes are made using polycarbonate hermetic measures of many competitive systems.
DELPHI allows a very flexible management of the drying cycle, thanks to the drying phase that can be divided in up to 8 steps, with progressive transitions of the kiln climate from step to step. Every step can be defined by gradient, EMC value or duration.
DELPHI is based on kiln bus system that makes it compatible with all the sensors/actuators for kiln dryers today available and to be developed in the next future, so it is suitable for future upgrades. In addition it comes with a serial interface (double standard-RS232+RS485) useful to connect it to master PC (using the WoodWizard 2 software). In the panel version (“easy wiring”) DELPHI controller is supplied split in two very small parts: the visualization module and the power module. With this solution the visualization module can be installed on the front panel of the switchboard while the power module can be installed can be directly inside if, for a very tidy wiring; the link between the modules is made with a single preassembled cable. But, if you prefer, the same solution could also be used to install the power module into the switchboard and the visualization module directly in your office, far up to 1, 2km.